KMITL Expo 2026 LogoKMITL 66th Anniversary Logo

Innovation in Cotylelobium lanceolatum Craib Extract in the Form of Nano Silver for Diabetic Wound Healing

Abstract

Diabetes is a significant global health issue, particularly due to complications related to diabetic wounds. Studies indicate that approximately 15-25% of diabetic patients develop foot ulcers, with more than 50% of severe cases leading to amputation. This results in a substantial decline in the quality of life for patients. Current treatments for diabetic wounds face challenges such as antibiotic-resistant bacterial infections and delayed wound healing, highlighting the need for innovative solutions to accelerate the healing process and reduce the risk of limb loss. Cotylelobium lanceolatum Craib, a medicinal plant long utilized in traditional Thai medicine, is known for its anti-inflammatory and wound-healing properties. This study focuses on developing an extract from Cotylelobium lanceolatum Craib in the form of nano silver (Nano Silver) to enhance the effectiveness of diabetic wound treatment. Nano silver technology enables deeper penetration into the skin, provides potent antibacterial activity, and promotes wound healing by reducing inflammation and stimulating tissue regeneration. The development of nano silver derived from Cotylelobium lanceolatum Craib extract is expected to help reduce chronic wounds in diabetic patients, lower the risk of infection, and decrease the incidence of limb amputation and mortality associated with diabetic wound complications. This research represents a significant step toward creating a safer and more effective treatment alternative for diabetic wound care.

Objective

โรคเบาหวานเป็นปัญหาสุขภาพที่สำคัญทั่วโลก โดยเฉพาะภาวะแทรกซ้อนที่เกี่ยวข้องกับ แผลเบาหวาน ซึ่งพบว่า ร้อยละ 25 ของผู้ป่วยเบาหวานมีแนวโน้มเกิดแผลที่เท้า และแผลเหล่านี้มักรักษายากกว่าบาดแผลทั่วไป เนื่องจากมี ภาวะการไหลเวียนเลือดผิดปกติ การติดเชื้อแบคทีเรียดื้อยา และการฟื้นฟูเนื้อเยื่อที่ล่าช้า หากไม่ได้รับการรักษาที่เหมาะสม อาจนำไปสู่ภาวะแทรกซ้อนที่รุนแรงจนต้องทำ การตัดขา ซึ่งในแต่ละปีมีผู้ป่วยเบาหวานมากกว่า 26,000 รายที่ต้องถูกตัดขา ส่งผลกระทบต่อคุณภาพชีวิตของผู้ป่วยและเพิ่มภาระค่าใช้จ่ายในการรักษาพยาบาล ปัจจุบัน ยารักษาแผลเบาหวานที่มีอยู่ในท้องตลาดมักมีราคาสูง และยังพบปัญหาเรื่อง การดื้อยาและผลข้างเคียงจากการใช้ยาปฏิชีวนะในระยะยาว ดังนั้น การพัฒนา นวัตกรรมจากสมุนไพรไทย ที่สามารถช่วยรักษาแผลเบาหวานได้อย่างมีประสิทธิภาพจึงเป็นแนวทางที่สำคัญ งานวิจัยนี้มุ่งเน้นไปที่การพัฒนาสารสกัดจาก เคี่ยม (Cotylelobium lanceolatum Craib) ซึ่งเป็น สมุนไพรไทยที่ถูกใช้ในยาแผนโบราณมาช้านาน โดยเฉพาะด้านการรักษาแผลและการต้านการอักเสบ ด้วยเทคโนโลยี นาโนซิลเวอร์ (Nano Silver) ซึ่งช่วยเพิ่มการดูดซึมเข้าสู่เนื้อเยื่อได้ลึกขึ้น ฆ่าเชื้อแบคทีเรียได้ดี และช่วยเร่งกระบวนการสมานแผล การพัฒนาสารสกัดเคี่ยมในรูปแบบนาโนซิลเวอร์นี้ คาดว่าจะเป็น ทางเลือกใหม่ในการรักษาแผลเบาหวาน ที่มีต้นทุนต่ำกว่ายาปัจจุบัน ลดการเกิดแผลเรื้อรัง ลดความเสี่ยงในการถูกตัดขา และช่วยให้ผู้ป่วยสามารถเข้าถึงการรักษาที่มีประสิทธิภาพได้มากขึ้น ซึ่งจะช่วยลดอัตราการเสียชีวิตจากภาวะแทรกซ้อนของโรคเบาหวานในระยะยาว

Other Innovations

Study on parameters in bamboo charcoal production process affecting on kiln efficiency and quality of charcoal in furnace prototype comparing with industrial furnace

คณะวิศวกรรมศาสตร์

Study on parameters in bamboo charcoal production process affecting on kiln efficiency and quality of charcoal in furnace prototype comparing with industrial furnace

-

Read more
PRODUCTION OF PYROLYSIS OIL FROM LANDFILLED PLASTIC WASTES FOR UTILIZATION AS A RENEWABLE FUEL

คณะวิทยาศาสตร์

PRODUCTION OF PYROLYSIS OIL FROM LANDFILLED PLASTIC WASTES FOR UTILIZATION AS A RENEWABLE FUEL

The aim of experiment was to study the pyrolysis oil derived from sorted landfill plastic waste that had been buried for 15 years by the Nonthaburi Provincial Administrative Organization. The pyrolysis oil was produced using a Fixed-Bed Reactor at 450 °C for 1.5 hours with LPG as the feedstock, with the goal of using the pyrolysis oil as an alternative fuel. The experiment was conducted under four different conditions : (1) plastic waste buried in a landfill that has not been washed but has been reduced in size, (2) plastic waste buried in a landfill that has been washed and has been reduced in size, (3) plastic waste buried in a landfill that not has been washed and has not been reduced in size, (4) plastic waste buried in a landfill that has not been washed and has been reduced size, with activated carbon used as a catalyst. The experiment revealed that three products were produced : Oil, gas, and char in different quantity. The pyrolysis oil were compared in terms of quality based on pH, Heating value, Moisture content, Functional group, and Chemical Composition. The pyrolysis oil we obtained will be referenced according to the criteria from the Department of Energy Business. The analysis results of the pyrolysis can explain which conditions are suitable for replacing fuel oil in industrial It is therefore one of the approaches that helps manage plastic waste in landfills, reducing the quantity by converting it into usable energy.

Read more
The Development of Hand Gesture Recognition for Controlling Electronic Devices

คณะวิทยาศาสตร์

The Development of Hand Gesture Recognition for Controlling Electronic Devices

This research will begin with a review of literature and related studies to examine existing technologies and methods for hand gesture recognition and their applications in controlling electronic devices such as drones, robots, and gaming systems. Subsequently, a hand gesture recognition system will be designed and developed using machine learning and computer vision techniques, with a focus on creating an algorithm that operates quickly and accurately, making it suitable for real-time control. The developed system will be tested and refined using various simulated scenarios to evaluate its efficiency and accuracy in diverse environments. Additionally, a user-friendly interface will be developed to ensure accessibility for all user groups. The research will also incorporate qualitative studies to gather feedback from both novice users and experts, which will contribute to further system improvements, ensuring it effectively meets user needs. Ultimately, the findings of this research will lead to the development of a functional prototype for gesture-based control, which can be applied in industries and entertainment. This will contribute to advancements in innovation and new technologies in the future.

Read more